Product Description

The function of the auto CV JOINT universal joint:
The inner cv joint is connected to the gearbox differential, and the outer ball cage is connected to the wheel. The function of the outer cv joint is the function of the outer cv joint, no matter it is power output or when the vehicle is turning.
What to pay attention to when using the car cv joint dust cover boot:
1. The cv joint plays an important role in the transmission system of the car. It can transmit power from the engine to the wheels, so the cv joint should be well lubricated and dust-proof. Once the cv joint dust cover boot is broken, it needs to be replaced in time. .
2. When there are regular abnormal noises when the car turns or bumps, you can check whether the dust cover boot of the car cv joint is broken, because the dust cover boot of the cv joint is broken, and it is easy for dust to enter and damage the cv joint.
3. If there is no problem with the dust cover boot of the car cv joint, you should go to the auto repair shop to check whether the cv joint is broken by a professional master. If the cv joint is broken, you need to replace it, and it is best to replace the cv joint dust cover boot .

What caused the cv joint to be damaged?
1. The dust cover boot is damaged
The service life of the cv joint is closely related to the dust cover. The dust cover boot can effectively protect the internal grease of the cv joint from being polluted by the outside and being lost to the outside. Once the dust cover is damaged, if it is not discovered by the car owner in time, it will cause the inside of the cv joint to be polluted by sand, stones and muddy water from the outside, and it will be damaged quickly.
2. Long-term wading into water
In some models, the small clips of the dust jackets are not tightened very strongly. It can meet the daily splash waterproof, but if the water is too deep for a long time, it is easy to cause water to enter the cv joint. It is not easy for the car owner to find out after the water enters, which will lead to wear and tear inside the cv joint.

HDAG brand CV JOINTS universal joint FEATURE:
1. Bell-shaped shell: CF53 ball cage special steel or 55# steel, after forging + normalizing treatment, good rigidity, high strength and wear resistance. HDAG adopts a double-arc four-point contact structure, which is the most ideal channel structure for the outer ball cage at present.
2. Inner wheel and cage: applied material of 20CrMnTi (gear steel) + carburizing (the carburizing layer is controlled at 0.6mm);Compared with 20Cr, 20CrMnTi has the advantages of strong hardenability and permeability.
3. CV JOINTS Grease: molybdenum disulfide lithium base grease, molybdenum disulfide has good lubricating properties and excellent wear resistance, the lithium base grease type added with MoS2 has a good effect on metal parts that are directly stamped and formed without grinding and deep processing Running function; high and low temperature can work normally at -30°C-120°C.
4. CV JOINTS Dust cover boot: Neoprene (polychloroprene) + nitrile rubber, with good oil and chemical resistance, flame resistance, CHINAMFG resistance, weather resistance (-40 ° C ~ 120 ° C), high tensile strength Tensile strength and other properties
5. Steel ball: adopt bearing steel GCr15
6. Inner CV JOINT universal joint bolts: 35CrMo or 40Cr+hot forging+quenching and tempering, the performance grade is 12.0, the hardness value HV385~435 (HRC39-44) is the same standard as the original OEM parts, the torsional strength is high

Product description
Driveshaft cv joint axle for CHINAMFG Lexus Infiniti Corolla Yaris RAV4 Prius Hiace Prado Pickup Matrix Wish Highlander LandCruiser Tacoma 4Runner Avensis Vios honda Accord CRV Odyssey Civic City CHINAMFG tiida latio versa CHINAMFG L2   SEMI EIXOL2   SEMI EIXO PAJERO 2.0 16V TR4 2   SEMI EIXO PAJERO 2.0 16V TR4 2002/2011 PAJERO IO 1.8 16V TR4 99/2001 MACHO/FEMEA AUTOM. C/ABS    SEMI EIXO VT9578           MR-276.869   PAJERO/L200 SPORT 2.5/2.8 2001/…   SEMI EIXO   KJH3114         3815A308 30X47X505 SEMI EIXO LD CHINAMFG PAJERO DAKAR 3.2 / 3.5 4X4 2571/
L200 TRITON C/ABS 08/   SEMI EIXO   KJH3115         3815A307 30X28X607 SEMI EIXO LE CHINAMFG PAJERO DAKAR 3.2 / 3.5 4X4 2571/
L200 TRITON C/ABS 08/   SEMI EIXO   KJH9545         CA260009   SEMI EIXO LE CHINAMFG PAJERO SPORT 2.8/3.0 1998/
L200 SPORT HPE C/ABS-03/07   SEMI EIXO   KJH9546         CA26571   SEMI EIXO LD CHINAMFG PAJERO SPORT 2.8/3.0 1998/
L200 SPORT HPE C/ABS-03/07   NISSAN       KJH3303 VT5477      NJH06-5191  C9211EL00B 25X23X49,10 NISSAN LIVINA 1.8 2571/       KJH3300     JHC29007   C92111HB0B 25X20X49,10 NISSAN MARCH  1.0 2011/   NI-1090   KJH3301 VT5228   JHC29004 NJH38-1011 C9211EL10A 25X22X49,10 NISSAN MARCH  1.6 2011/   NI-1052   KJH3304 VT5136     NJH41-T000 C9211ET571 29X24X56,25 NISSAN SENTRA 2.0 2007/       KJH3302 VT5380       C9211EL10D 25X22X49,10 NISSAN VERSA 1.6 2011/       KJH3306           29 X 25 FRONTIER   SEL 2.5 4X4 2008/…   NI-1043   KJH3307   AL-1082   NJH05-1082   28X27X50 NISSAN FRONTIER 2.8 2002 / 2007       KJH3309 VT5370       391003HC0B           KJH3310 VT5383      NJH49-5383  39100-3RZ0C           KJH3311 VT5545   JHC29003  NJH45-1011              KJH3314                 5710-D40B   KJH3316 VT5178   JHC29006 NJH31-1449 39100EB70C 29x36x67 NISSAN NP300 NAVARA (D40) 2.5 dCi    SEMI-EIXO    KJH3305         39100EB70C 29X27X648  SEMI-EIXO LD/LE FRONTIER SEL 2.5 4X4-08/   

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Condition: New
Color: Natural Color
Certification: CE, ISO
Car Model 6: Toyota Lada Mitsubishi Nissan Isuzu Honda Mazda
Car Model 1: for Hyundai KIA Daewoo Daihatsu Suzuki
Car Model 3: for FIAT Opel Peugeot Renault Citroen


Customized Request

universal joint

How do you properly maintain and lubricate a universal joint?

Maintaining and lubricating a universal joint is essential to ensure its smooth operation, extend its lifespan, and prevent premature failure. Here’s a detailed explanation of the proper maintenance and lubrication process:

To properly maintain and lubricate a universal joint, follow these steps:

  1. Consult Manufacturer Guidelines: Refer to the manufacturer’s guidelines and recommendations specific to the universal joint being used. Manufacturers often provide detailed instructions regarding maintenance intervals, lubrication types, and procedures. Familiarize yourself with these guidelines before performing any maintenance or lubrication.
  2. Inspect the Joint: Regularly inspect the universal joint for signs of wear, damage, or misalignment. Look for indications of excessive play, corrosion, fatigue, or any other abnormalities. Inspecting the joint allows you to identify potential issues before they escalate. If any problems are detected, address them promptly to prevent further damage or failure.
  3. Clean the Joint: Before applying lubrication, clean the universal joint to remove any dirt, debris, or old lubricant that may have accumulated. Use a suitable cleaning agent or solvent recommended by the manufacturer. It’s important to have a clean surface for effective lubrication.
  4. Select the Proper Lubricant: Choose the appropriate lubricant specified by the manufacturer. The type of lubricant required may vary based on factors such as the universal joint design, operating conditions, and temperature range. Common lubricants used for universal joints include grease or oil. Ensure that the selected lubricant is compatible with the joint’s materials and operating environment.
  5. Apply Lubricant: Apply the lubricant to the universal joint according to the manufacturer’s instructions. Pay attention to the specific lubrication points, such as the bearing caps, needle bearings, or trunnions. Use the recommended amount of lubricant to ensure proper coverage and distribution. Avoid over-lubrication as it can lead to excessive heat generation and increased friction.
  6. Operate the Joint: After lubrication, operate the universal joint to distribute the lubricant evenly and ensure it reaches all necessary components. Rotate or move the joint through its full range of motion several times to facilitate the spreading of the lubricant and to verify smooth operation. This step helps to eliminate any air pockets and ensures that all surfaces are adequately lubricated.
  7. Monitor and Reapply: Regularly monitor the universal joint’s performance and lubrication condition. Periodically check for any signs of lubricant breakdown, contamination, or leakage. Depending on the manufacturer’s recommendations, reapply lubrication at specified intervals or when necessary to maintain optimal operation. Factors such as operating conditions, load, and temperature may influence the frequency of lubrication.
  8. Keep Records: Maintain a record of the universal joint’s maintenance activities, including lubrication dates, lubricant type, and any observations made during inspections. These records can help establish a maintenance schedule, track the joint’s performance over time, and serve as a reference for future maintenance or troubleshooting.

By following these steps and adhering to the manufacturer’s guidelines, you can properly maintain and lubricate a universal joint, promoting its longevity, reliability, and optimal performance.

universal joint

How do you address noise issues in a universal joint?

Noise issues in a universal joint can be addressed through various measures. Here’s a detailed explanation:

Noise in a universal joint can result from factors such as misalignment, imbalance, wear, or inadequate lubrication. Addressing noise issues involves identifying the underlying causes and implementing appropriate solutions. Here are some steps to mitigate noise problems in a universal joint:

  • Alignment: Ensuring proper alignment between the input and output shafts is crucial for reducing noise in a universal joint. Misalignment can lead to increased stress, vibration, and noise generation. Aligning the shafts within the manufacturer’s specified tolerances helps minimize the angular deflection and associated noise.
  • Balancing: Imbalance in the rotating components of a universal joint can contribute to noise generation. Balancing the yokes, crosses, or other relevant components helps minimize vibrations and noise. Techniques such as adding counterweights or using precision balancing equipment can help achieve better balance and reduce noise levels.
  • Lubrication: Inadequate or improper lubrication can result in increased friction, wear, and noise in a universal joint. Using the manufacturer-recommended lubricant and following the specified lubrication intervals help ensure smooth operation and minimize noise. Regular maintenance, including lubrication checks and replenishment, is essential to mitigate noise issues arising from insufficient lubrication.
  • Wear and Replacement: Wear in the universal joint components, such as the cross, bearings, or yokes, can contribute to noise. Regular inspection for signs of wear, such as pitting, scoring, or play, is necessary. If wear is detected, replacing the worn components with new ones that meet the manufacturer’s specifications can restore proper functionality and reduce noise.
  • Vibration Damping: Implementing vibration damping techniques can help reduce noise in a universal joint. This may involve using vibration-absorbing materials, such as rubber or elastomeric elements, at appropriate locations to absorb and dissipate vibrations. Dampening vibrations helps minimize the transmission of noise and improves the overall performance of the joint.
  • Proper Maintenance: Regular maintenance practices are vital for addressing noise issues in a universal joint. This includes periodic inspections, lubrication checks, and addressing any signs of misalignment, wear, or damage. Timely maintenance helps identify and rectify potential sources of noise before they escalate and affect the joint’s performance and reliability.

By implementing these measures and considering the specific operating conditions and requirements of the system, noise issues in a universal joint can be effectively addressed. It’s important to consult the manufacturer’s guidelines and recommendations for proper installation, operation, and maintenance to ensure optimal performance and minimize noise generation in the joint.

universal joint

What are the benefits of using a universal joint in a mechanical system?

Using a universal joint in a mechanical system offers several benefits that contribute to the efficient and reliable operation of the system. Here are some of the key advantages:

  • Misalignment compensation: One of the primary benefits of a universal joint is its ability to compensate for misalignment between rotating shafts. Universal joints can effectively transmit rotary motion between shafts that are not perfectly aligned, allowing for flexibility in system design and assembly. This flexibility accommodates various installation constraints and helps to minimize stress and wear on components.
  • Angular motion transmission: Universal joints enable the transmission of angular motion between shafts that are not parallel or collinear. They can transfer rotational movement even when the shafts are at different angles to each other. This capability is particularly useful in applications where the shafts need to be connected at non-linear or offset angles, providing versatility and enabling complex mechanical systems.
  • Torque transmission: Universal joints are capable of transmitting torque between shafts efficiently. They allow for the transfer of power from one shaft to another without a direct and rigid connection. This feature is especially important in applications where there may be slight misalignment or movement between the shafts due to factors like suspension systems, articulation, or vibration.
  • Reduced vibration and shock absorption: Universal joints can help dampen vibration andshocks in a mechanical system. They absorb and distribute the impact forces caused by uneven movement or external disturbances, reducing the transmission of vibrations to other parts of the system. This feature is particularly beneficial in applications where smooth operation and reduced wear and tear are essential, such as automotive drivelines or industrial machinery.
  • Constant velocity transmission: Certain types of universal joints, such as double joints or constant velocity joints, provide constant velocity transmission. These joints eliminate speed variations and maintain a consistent rotational speed even when the input and output shafts are at different angles. Constant velocity transmission is crucial in applications where precise and uniform motion is required, such as automotive steering systems or robotics.
  • Flexibility and articulation: Universal joints offer flexibility and articulation, allowing for movement and rotation in multiple directions. They can accommodate changes in the orientation and position of connected shafts, providing mechanical systems with the ability to adapt to dynamic conditions. This flexibility is particularly advantageous in applications involving moving parts, such as suspension systems, robotic arms, or machinery with articulating components.
  • Compact design: Universal joints are relatively compact in size, making them suitable for applications with space constraints. Their compact design allows for efficient integration into mechanical systems without occupying excessive space. This feature is valuable in various industries, including automotive, aerospace, and robotics, where optimizing space utilization is crucial.
  • Reliability and durability: Universal joints are designed to be durable and reliable, with the ability to withstand high loads, torque, and operating conditions. They are constructed from robust materials and undergo rigorous testing to ensure long-lasting performance. This reliability makes them suitable for demanding applications in industries such as automotive, manufacturing, agriculture, and more.

The benefits of using a universal joint in a mechanical system contribute to improved functionality, increased efficiency, and extended component lifespan. By enabling misalignment compensation, angular motion transmission, torque transfer, vibration reduction, constant velocity transmission, flexibility, and compact design, universal joints enhance the overall performance and reliability of mechanical systems.

China Professional OEM Quality Driveshaft Auto Universal CV Joint Axle for CZPT CZPT CZPT CZPT Honda Mazda CZPT CZPT CZPT Daihatsu Suzuki FIAT Opel Peugeot Renault  China Professional OEM Quality Driveshaft Auto Universal CV Joint Axle for CZPT CZPT CZPT CZPT Honda Mazda CZPT CZPT CZPT Daihatsu Suzuki FIAT Opel Peugeot Renault
editor by CX 2024-04-23

Universal Joint

As one of the universal joint manufacturers, suppliers, and exporters of mechanical products, We offer universal joint and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the universal joint.

Recent Posts