Drum gear coupling detailed introduction:

The drum tooth joint is a rigid flexible joint, which is composed of an inner gear ring with the same number of teeth and an outer toothed flange half coupling.The external teeth are divided into two types: straight teeth and drum teeth. The drum tooth joint allows large angular displacement (compared to the straight tooth joint), which improves the contact conditions of the teeth, increases the torque transmission capacity, and prolongs the life.It has the ability to compensate the axis offset in the radial, axial and angular directions. Compared with the CL type spur gear coupling, it has compact structure, small rotation radius, large load capacity, high transmission efficiency, low noise, and long maintenance period. Etc.Provided by Botou Wansheng Coupling

Drum tooth joint model, standard symbol, performance summary:

GICL type drum-shaped tooth joint, JB/T8854.3-2001 root joint is suitable for connecting two horizontal coaxial lines. It is a transmission shaft system with a certain angular displacement. The transmission nominal torque is 0.8-3200KN.m. The working environment temperature is -20- 80;

GICLZ typeDrum gear coupling, JB/T8854.3-2001 This coupling is suitable for connecting horizontal double coaxial lines. It is a transmission shaft system with a certain angular displacement. When the two ends are connected, the GICLZ type is used, and the nominal torque is 0.8-3200KN. .m, working temperature.

GIICL型鼓形齿接头、JB/T8854.2-2001根接头适用于连接水平两轴的传动轴系统，是具有一定角度补偿两轴的相对位移性能的鼓形齿接头，动作环境温度为-20~ 80，传递公称扭矩为0.4-4500KN.m

Giles-type drum tooth joint, JB/T8854.2-2001 This joint is suitable for fastening horizontal two coaxial transmission shaft systems. It is a drum tooth joint with the performance of compensating the relative deviation of the two shafts at a certain angle. The shaft performs long-distance movement, and the working environment temperature is -20 ~.

GCLD typeDrum gear coupling, JB/T8854.1-2001 root coupling is suitable for the drive shaft system connecting the two horizontal axes of the motor and the machine. It is a drum-shaped gear coupling with a certain angle compensation for the relative offset of the two shafts. The working environment temperature- 20 -.