Product Description

Product Description

                                    Adjustable Steel Props for Slab Formwork Construction
Steel prop is an important scaffolding component of HORIZON formwork system, especially in the slab formwork. With the prop’s high loading capacity, low weight and stability, HORIZON slab formwork works safely and efficiently on site as well as cost-effective. Also, the prop is fast and easy for handling on site.

Product Name

Steel Adjustable Prop, adjust steel prop, shoring prop

Tube diameter

40-48 mm / 48-56 mm / 48/60 mm

Tube thickness







Light Duty Prop


Heavy Duty Prop


Plate type

suqare plate or flower plate

Surface finished

painted, powder coated, galvanized


1500 pcs or 2000 pcs / 20′ FT container


The production process of scaffolding steel prop is complex and cumbersome, including the following:

Inner tube: Cutting Tube→ Punching→ Welding Bottom Plate.

Outer tube: Cutting Tube→ Rolling Threaded Tube→ Punching Oval Hole→ Welding Threaded Tube→ Welding Bottom Plate.

Accessories: G pin→ Forged Pin→ Nuts (coated sand/precision casting)→ Handles.

Surface Treatment: Hot-dip galvanized.

Assembly→ Reaming→ Labeling→ Palletizing (steel tape) →Labeling→ Loading Container→ Make Inspection Photos→ Make Loading Photos.

Product Details



The Type of scaffolding Prop


Name Pic Code No. Adjust Height Tube&Plate size Finish
LIGHT DUTY PROP PSL01 1080-1790 40/48
PSL02 1800-3150
PSL03 1950-3350
PSL04 2570-3880
PSL05 3200-4890
HEAVY DUTY PROP PSL01 1080-1790 48/60 Pre-gal
PSL02 1800-3150
PSL03 1950-3350
PSL04 2570-3880
PSL05 3200-4890
HEAVY DUTY PROP PSH01 1080-1790 48/60 Elec-gal
PSH02 1800-3150
PSH03 1950-3350
PSH04 2570-3880
PSH05 3200-4890

U TYPE HEAD PROP PSU01 1600-2900 40/48
PSU02 1800-3200
PSU03 2000-3600
PSU04 2100-3800
PSU05 2200-4000
T TYPE HEAD PROP PS01 1600-2900 40/48/60
PS02 1800-3200
PS03 2000-3600
PS04 2100-3800
PS05 2200-4000


                                    Proper Way to Use A Scaffolding Prop
When you choose to use steel supports, you must first know the height of the building so that you can choose a scaffolding prop with a suitable adjustment range.

         Adjust the inner tube to the desired                                     Insert the pin through an adjacent                                    After the pillar is vertical, the height can be
         approximate height.Keep the outer tube                              hole in the inner tube.                                                      adjusted slightly by turning the collar
         stable by placing the foot on the bottom plate.                                                                                                             clockwise. This will rotate the inner tube.                                                                      

Steel Adjustable Props 

All-steel adjustable props (often referred to as acrow or ‘acro’ props) are the most common form of support prop used and are available in 5 different sizes. The base and top plate of a steel adjustable prop are quite small.
Steel adjustable props are popular on construction sites, often used as a support when building.

All-steel adjustable props are stronger than adjustable support props as they are made completely from reinforced steel. Unlike push pull props, however, they can only be used in a vertical position as the feet are fixed.


1. Who are we?
We are professional aluminum formwork accessories manufacturer and locaded fastener producing base site yongnian area of HangZhou city of  China, start from 2005,Our products sell to Mid East(20.00%),North America(20.00%),Southeast Asia(15.00%),South America(10.00%),Eastern Asia(10.00%),Eastern Europe(10.00%),South Asia(10.00%),Africa(5.00%). There are total about 101-200 people in our factory.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Fastener and aluminum formwork accessories such as wedge pin, mivan stud pin, long pin,thread rod,tie rod and CZPT nut, swivel coupler,steel prop, swivel clamp, al-bracket, waller bracket, waller clamp, flat wall tie, flat tie, hex bolt, hex nut, stud bolt and wedge anchor bolt.
4. Why should you buy from us not from other suppliers?
Through 17 years of operation and development, our products have good quality with lowese price, our unique service is supply products customized for our client.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,Cash;
Language Spoken:English,Chinese.


/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24-Hour After-Sales Service
Warranty: 1 Year
Certification: ISO, ROHS, CE
US$ 1/Piece
1 Piece(Min.Order)


Order Sample



Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.

about shipping cost and estimated delivery time.
Payment Method:


Initial Payment

Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

u joint

Types of CZPT U Joints

A u joint is a mechanical part that connects various components in a vehicle’s drivetrain. Its primary function is to transfer power from the transmission to the axle housing assembly. It also helps the driveshaft change angle when the vehicle is moving, such as when the suspension moves. It is very important to choose a high-quality joint to ensure optimum performance. Otherwise, the part may fail, which could result in damage to the vehicle and potentially harm to the occupants.

CZPT U Joints

CZPT U Joints are high quality, precision engineered ball joints that are made from durable steel. They are easy to maintain, fully greaseable, and cover a wide variety of vehicles. CZPT products are also very affordable. This is an attractive benefit for drivers, as they’ll be able to afford to purchase replacement parts for their vehicle.
CZPT U Joints are precision-ground to tight tolerances. They also have a warranty that covers defects in materials and workmanship. The warranty covers both the parts and labor involved in replacing them. CZPT’s u-joints are built to last and have been tested rigorously to ensure they’re reliable. The company also uses the latest technology to ensure that installation of replacement parts is quick and easy.
Premium u-joints from CZPT are machined to original equipment specifications. They’re part of the company’s total undercar solutions. Each u-joint is precision-ground to tight tolerances and is quality-controlled at every stage of production. CZPT’s u-joints also feature cold-formed and case-hardened bearing cups that offer 360-degree lubrication distribution.
u joint

CZPT CV joints

If you’re in the market for a new set of CV joints for your car or truck, you’ll want to check out the CZPT brand. These parts are known for being durable and reliable, and they can restore your car’s chassis to like-new condition. There are many types of CZPT CV joints available, from front-end CV joints to rear-end CV joints and upper and lower ball joints.

Hooke’s joint

The Hooke’s joint is a mechanical joint that transfers rotation between two shafts, typically a crankshaft and a transmission. The joint is made up of two yoke arm members that are placed at right angles. A cross-shaft connects the two yoke arms. The arms are supported by needle roller caps. Relative rotations about the gimbal give the joint added degrees of freedom.
The Hooke’s joint is one of many different types of universal joints and is often used to connect two non-parallel shafts. Its U-shaped forked end makes it possible to accurately fix the two shafts in position and transmit motion. It is also commonly used in automobiles to transmit power from a gearbox to a rear axle.
The Hooke’s joint can be explained with the help of a simple illustration. In Fig. 6.29, the driven shaft is inclined downward, while the input shaft is horizontal. As the driven shaft turns 90 degrees, the input shaft moves to its maximum position, while a further quarter turn brings the joint back to its initial position.
In aviation, the Hooke’s joint effect has been used to describe the behavior of two different activities: hovering and autorotating. In addition to this, the concept of the Hooke’s joint effect has been applied to teetering rotors, lead-lag hinges, and flapping hinges. Despite this broad application, however, it is important to remember that this is a theory, not gospel.
u joint

Double Cardan joint

The Double Cardan joint is a type of CV joint. This type of joint transmits torque from a drive shaft to a driven shaft, and it exhibits good stability, low vibration, and low inertia. It’s designed for heavy-duty applications. It consists of a cylindrical torque coupler and two yokes. The two yokes are attached by a collar, with the first collar being pinned to the input shaft and the second collar pinned to the output shaft.
This type of joint is used in telescopic drive shafts. These joints have an adjustable center element that enables them to compensate for axial displacement or misalignment. These types of joints also allow for faster repositioning. Some of them even have telescopic segments. If your shaft is not aligned properly, double Cardan joints may be the best solution.
The double Cardan joint was developed to overcome the limitations of single Cardan joints in PTO drivelines. They are used in cases where the operating angles are too large for single Cardan joints. The double cardan joint has a coupling yoke with a centreing mechanism to keep the input and output shafts in line. In addition, the Wide-angle Double Cardan joint utilizes a flat disc with a couple of sockets.
The Double Cardan joint offers smooth operation at higher operating angles than single cardan joints. But this type of joint is sensitive to ride height changes. Every inch increase in ride height changes the angle of the double cardan joint and the lower u-joint. For this reason, you may have to compromise between the two angles for a smooth operation.
China manufacturer CZPT Steel Prop Jack Shoring Prop   u joint replacementChina manufacturer CZPT Steel Prop Jack Shoring Prop   u joint replacement
editor by CX 2024-04-10

TAGs:u joint

Universal Joint

As one of the universal joint manufacturers, suppliers, and exporters of mechanical products, We offer universal joint and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the universal joint.

Recent Posts