Product Description

1.HW-8571# Cam Shedding Device Specification

1 Wall board We adopts HW-8571special heavy enhanced,Wallboard integration ,much more stable.
2 Gear in the large box Adopt ZheJiang HangZhou(TTG) gear, ultra-quite,wear-resistant,low vibration and high precision
3 Bearing in the large box Bearing in the large box is swiden SKF, Bearing out of the large box made in japan.
4 Beating up shaft Adopt special treatment of solid beating up shaft, centralized oil lubrication in the support sleeve, add in weft counterweight balance system (Haijia patent:2.9), optimization of beating up angle, the beating up more powerful and stable, cloth smooth.
5 Slay SUS304 stainless steel reinforced and polishing processing slay at the top brand in China, achieve cloth smooth.
6 Stripe Tianqi stripe, For 102 double stick, strengthening take-up.
7 Plastic stocks New type and high quality plastic stocks
8 Beam A number of optimization design on the basis of TSUDAKOMA ZW-851, the beam before and after the 5 angle pipe, steel material supply, before and after the beam with thickened angle.Especially before the beam on Haijia, unique design, draws on the advantages of air jet loom beam, making solid beating up shaft is more stable.
9 Suction pipe ∮76mm,thickness 6mm,sus304 stainless steel.
10 Cross beam Heavy and lengthen treatment
11 Tension spring ∮12mm
12 Panel HW-8571 Special type
13 Let-off and take -up device Mechanical or electronic
14 Temple bar,guide HW-8571 Special type ,3mm stainless steel
15 Temple Five ring 3 rows of fine needle puncture (0.3mm) under the pressure of Temple (made fine denier fabric cloth smooth) South Korea Xihu (West Lake) Dis. or Jilong brand.
16 Leno parts ZheJiang production assembly (slide seat:Stainless steel, low noise ear wire assembly, running smoothly, long service life).
17 Press roll New press fabric service,press roll 40#,equal tension take-up
18 Main motor The Haijia special power of 3.0KW red flag.Save electricity,start fast,low noise,little park,long life and other advantages(self-purchased Japan CZPT bearing)
19 Electronic control system Xinliao Brand.
20 Measuring Electronic measuring
21 Light detection weft Light detection weft, plus plug signal amplifier
22 Code Electronic code
23 Plunger Shutai ceramic plunger(39/28 mm)
24 Spring JAPAN AWA spring(∮10x∮150 mm)
25 Nozzle Korea MDH 90/60 nozzle
26 One way valve Japan AWA valve,up 8# down 9#.
27 Oil seal Made in ZheJiang
28 Cutter parts ZheJiang joint bearing,scissors,scissors spring ,improve efficiency.
29 Suction motor Electronic suction motor
30 Stabilized tank Double filter,bucket type.
31 Take heald level liner American DuPont material production, wear, long service life.
32 Dobby or heald frame Customer can match by themselves.
33 Painting TSUDAKOMA yellow color, 2 times over the primer, topcoat, special paint production line, improve the anti rust effect.
34 The whole machine of Stainless steel screw ZheJiang dongming SUS304 stainless steel screw,not rust.
35 Waterproof device Thickened waterproof curtain, TSUDAKOMA style transparent waterproof cover plate.
36 False twist spindle Pull type
37 Weft stand Double nozzle standard weft stand.
38 Swing degree 95 Swing degree
39 Casting Identify quality supplier, according to the standard drawings, guarantee the material and weight.

2,Haijia factory —–High Precision CNC Workshop

3,Performance Of Water Jet Loom In Haijia Customer’s Workshop

4, Highly recognized

5.our service
 1)Technical service
our company will provide best services to help you use our machine.As well,if you want to send your technician to our company to learn how to operate machines,we will very pround of it.
2)Quality Guarantee
We provide 12 months warranty.
3)Problem solving
We have professional engineers.
We will deal with your problem at the first time.
For any further information,just contact me on-line or mail me !

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Water Jet Loom
Voltage: 415V
Computerized: Non-Computerized
Precision: High Precision
Certification: CE, ISO9001: 2000
Warranty: 1 Year


Customized Request

u joint

Types of CZPT U Joints

A u joint is a mechanical part that connects various components in a vehicle’s drivetrain. Its primary function is to transfer power from the transmission to the axle housing assembly. It also helps the driveshaft change angle when the vehicle is moving, such as when the suspension moves. It is very important to choose a high-quality joint to ensure optimum performance. Otherwise, the part may fail, which could result in damage to the vehicle and potentially harm to the occupants.

CZPT U Joints

CZPT U Joints are high quality, precision engineered ball joints that are made from durable steel. They are easy to maintain, fully greaseable, and cover a wide variety of vehicles. CZPT products are also very affordable. This is an attractive benefit for drivers, as they’ll be able to afford to purchase replacement parts for their vehicle.
CZPT U Joints are precision-ground to tight tolerances. They also have a warranty that covers defects in materials and workmanship. The warranty covers both the parts and labor involved in replacing them. CZPT’s u-joints are built to last and have been tested rigorously to ensure they’re reliable. The company also uses the latest technology to ensure that installation of replacement parts is quick and easy.
Premium u-joints from CZPT are machined to original equipment specifications. They’re part of the company’s total undercar solutions. Each u-joint is precision-ground to tight tolerances and is quality-controlled at every stage of production. CZPT’s u-joints also feature cold-formed and case-hardened bearing cups that offer 360-degree lubrication distribution.
u joint

CZPT CV joints

If you’re in the market for a new set of CV joints for your car or truck, you’ll want to check out the CZPT brand. These parts are known for being durable and reliable, and they can restore your car’s chassis to like-new condition. There are many types of CZPT CV joints available, from front-end CV joints to rear-end CV joints and upper and lower ball joints.

Hooke’s joint

The Hooke’s joint is a mechanical joint that transfers rotation between two shafts, typically a crankshaft and a transmission. The joint is made up of two yoke arm members that are placed at right angles. A cross-shaft connects the two yoke arms. The arms are supported by needle roller caps. Relative rotations about the gimbal give the joint added degrees of freedom.
The Hooke’s joint is one of many different types of universal joints and is often used to connect two non-parallel shafts. Its U-shaped forked end makes it possible to accurately fix the two shafts in position and transmit motion. It is also commonly used in automobiles to transmit power from a gearbox to a rear axle.
The Hooke’s joint can be explained with the help of a simple illustration. In Fig. 6.29, the driven shaft is inclined downward, while the input shaft is horizontal. As the driven shaft turns 90 degrees, the input shaft moves to its maximum position, while a further quarter turn brings the joint back to its initial position.
In aviation, the Hooke’s joint effect has been used to describe the behavior of two different activities: hovering and autorotating. In addition to this, the concept of the Hooke’s joint effect has been applied to teetering rotors, lead-lag hinges, and flapping hinges. Despite this broad application, however, it is important to remember that this is a theory, not gospel.
u joint

Double Cardan joint

The Double Cardan joint is a type of CV joint. This type of joint transmits torque from a drive shaft to a driven shaft, and it exhibits good stability, low vibration, and low inertia. It’s designed for heavy-duty applications. It consists of a cylindrical torque coupler and two yokes. The two yokes are attached by a collar, with the first collar being pinned to the input shaft and the second collar pinned to the output shaft.
This type of joint is used in telescopic drive shafts. These joints have an adjustable center element that enables them to compensate for axial displacement or misalignment. These types of joints also allow for faster repositioning. Some of them even have telescopic segments. If your shaft is not aligned properly, double Cardan joints may be the best solution.
The double Cardan joint was developed to overcome the limitations of single Cardan joints in PTO drivelines. They are used in cases where the operating angles are too large for single Cardan joints. The double cardan joint has a coupling yoke with a centreing mechanism to keep the input and output shafts in line. In addition, the Wide-angle Double Cardan joint utilizes a flat disc with a couple of sockets.
The Double Cardan joint offers smooth operation at higher operating angles than single cardan joints. But this type of joint is sensitive to ride height changes. Every inch increase in ride height changes the angle of the double cardan joint and the lower u-joint. For this reason, you may have to compromise between the two angles for a smooth operation.
China Hot selling U Type Beating-up Shaft Textile Machine Water Jet Loom Double Nozzle   u joint bearing capsChina Hot selling U Type Beating-up Shaft Textile Machine Water Jet Loom Double Nozzle   u joint bearing caps
editor by CX 2024-03-27

Universal Joint

As one of the universal joint manufacturers, suppliers, and exporters of mechanical products, We offer universal joint and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the universal joint.

Recent Posts